![5/8"×24 RH Fluted Thread Protector [0.750" OD, 0.625" OAL] - SKU#9520](https://hughesprecision.com/wp-content/uploads/2018/03/578cap3.jpg)
![5/8"×24 RH Fluted Thread Protector [0.750" OD, 0.625" OAL] - SKU#9520 - Image 2](https://hughesprecision.com/wp-content/uploads/2018/04/62-75-62b3.jpg)
![5/8"×24 RH Fluted Thread Protector [0.750" OD, 0.625" OAL] - SKU#9520 - Image 3](https://hughesprecision.com/wp-content/uploads/2018/03/578cap4.jpg)
Description
5/8″×24 RH Fluted Thread Protector [0.750″ OD, 0.625″ OAL] – SKU#9520
This is a 5/8″×24 RH machined thread protector which is 5/8″ long with a fluted 3/4″ OD. It fits barrels and adapters using 5/8″×24 RH threading. Don’t run the risk of damaging the threads when muzzle accessories are not being used. Thread Protector is High Quality 4140 Steel with a Black Oxide Finish.
Please measure the length of the thread on your barrel or adapter to be sure that 5/8″ LONG will cover your thread.
ALWAYS VERIFY YOUR MUZZLE DEVICE IS RATED FOR THE CALIBER YOU INTEND TO SHOOT
ALWAYS VERIFY PROPER ALIGNMENT BEFORE FIRING
![5/8"×24 RH Fluted Thread Protector [0.905" OD, 0.625" OAL] - SKU#9560](https://hughesprecision.com/wp-content/uploads/2018/07/DSC_0006-scaled-500x500.jpg)
![1/2"×28 RH Fluted Thread Protector [0.905" OD, 0.625" OAL] - SKU#9390](https://hughesprecision.com/wp-content/uploads/2018/07/DSC_0016-scaled-500x500.jpg)
![M8×0.75 RH Fluted Thread Protector [0.625 OD, 0.440" OAL] - SKU#9100](https://hughesprecision.com/wp-content/uploads/2018/10/DSC_0025-500x500.jpg)
Matthew Wright (verified owner) –
This fit perfectly on my Ballistic Advantage Performance Series Hanson Profile .300 Blackout barrel. The diameter matches up perfectly, and the length does too. I like the fluting vs a textured finish like many other thread protectors out there. Very pleased!