![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-5-scaled.jpg)
![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046 - Image 2](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-6-scaled.jpg)
![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046 - Image 3](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-4-scaled.jpg)
![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046 - Image 4](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-3-scaled.jpg)
![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046 - Image 5](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-2-scaled.jpg)
![M8×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] - SKU#046 - Image 6](https://hughesprecision.com/wp-content/uploads/2016/11/wp22-1-scaled.jpg)
Description
M8×0.75 RH (female) to 1/2″×28 RH (male) Thread Adapter w/ Protector [FOR: Walther P22] – SKU#046
This adapter fits S&W, M&P22 or Walther P22 pistol and converts them to use standard U.S. 1/2″×28 RH threaded sound suppressors or other muzzle accessories.Our adapter easily replaces the factory barrel nut and gives you the 1/2″×28 RH male thread. To install it, all you have to do is remove the factory barrel nut with the factory supplied wrench and then replace it with this adapter which will give you the 1/2″×28 RH male thread on the end of the barrel. A machined thread protector with a fluted OD is also included in the price so that you won’t run the risk of damaging the threads when muzzle accessories are not being used. Adapter and Thread Protector are High Quality 4140 Steel with Black Oxide Finish.
ALWAYS VERIFY YOUR MUZZLE DEVICE IS RATED BY THE MANUFACTURER FOR THE INTENDED CALIBER
ALWAYS VERIFY PROPER ALIGNMENT BEFORE FIRING
![19/32″×32 / .5938″×32 RH (female) to 5/8"×24 (male) Thread Adapter [FOR: M14 Rifle] - SKU#068](https://hughesprecision.com/wp-content/uploads/2016/10/m14-58-3-scaled-500x500.jpg)
Christopher George (verified owner) –
Excellent quality at a great price! Ships quickly and looks great!
David (verified owner) –
Good quality, probably not meant for the 5″ Target model P22 – you can get it to tighten down but the compensator makes it difficult and you can’t use the factory wrench. This is not an issue with the adapter, but just a heads up. Would recommend!