Description
1/2″×28 RH (female) to 1/2″×28 RH (male) 2-1/4″ Barrel Extension – SKU#036
This barrel extension fits 1/2″×28 RH threaded barrels, when installed it extends the barrel length by 2-1/4″ to get that extra length you need for some suppressors and other muzzle devices to clear the hand guard (the most common use for this adapter is on AR Style rifles in 5.56/.223). To install the 1/2″×28 RH Barrel Extension, all you have to do is unscrew your thread protector, brake or other device/accessory and then replace it with this adapter which will give you a 2-1/4″ extension to your barrel length and provides a 1/2″×28 RH thread on the end of the barrel. You are now ready to attach any device/accessories that fits the 1/2″×28 RH threaded barrel. Barrel Extension is High Quality 4140 Steel with Black Oxide Finish.
Hughes Precision makes the pieces fit. This barrel extension will give you the extra length in front of your hand guard allowing you to mount suppressors or muzzle accessories that use 1/2″×28 RH U.S. standard threading . This Hughes Precision Threaded Barrel Extension is precision made to ensure concentricity and axial thread alignment key in avoiding dangerous baffle strikes.
For use with cartridges up to and including 9mm and .357 caliber.
ALWAYS VERIFY YOUR MUZZLE DEVICE IS RATED FOR THE CALIBER YOU INTEND TO SHOOT
ALWAYS VERIFY PROPER ALIGNMENT BEFORE FIRING
![1/2"×28 RH Fluted Thread Protector [0.750" OD, 0.500" OAL] - SKU#9330](https://hughesprecision.com/wp-content/uploads/2016/11/DSC_0001-6-scaled-500x500.jpg)
![1/2"×28 RH STAINLESS Fluted Thread Protector [0.750" OD, 0.500" OAL] - SKU#9331](https://hughesprecision.com/wp-content/uploads/2016/11/DSC_0001-7-scaled-500x500.jpg)
![M9×0.75 RH (female) to 1/2"×28 RH (male) Thread Adapter w/ Protector [FOR: GSG 1911-22, 5PK, SIG 1911] - SKU#045](https://hughesprecision.com/wp-content/uploads/2016/11/s-1911-5-scaled-500x500.jpg)
![3/8"×24 RH (female) to 1/2"×28 RH (male) STAINLESS Thread Adapter w/ Protector [FOR: S&W M&P 22 COMPACT] - SKU#023](https://hughesprecision.com/wp-content/uploads/2016/11/DSC_0001-12-scaled-500x500.jpg)
![11/32"×24 RH (female) to 1/2"×28 RH (male) STAINLESS Thread Adapter w/ Protector [FOR: RUGER SR22] - SKU#022](https://hughesprecision.com/wp-content/uploads/2016/11/sr22s-1-scaled-500x500.jpg)
braschm (verified owner) –
I had a somewhat hard time finding barrel extenders and this one fits the bill. I recommend! There was some drag installing, so the threads may be a bit tight,but it wasn’t overly difficult. And at least that way there’s no question as to thread looseness or engagement. Looks to be well machined and coaxial. Two areas to consider for improvement: Thread size may be a bit tight, and hex thickness for tightening with a tool is a bit to slim for my open-end wrench. Maybe a hex surface a bit wider (could not insert wrench with muzzle device installed on male thread. Minor concerns. Thanks for the great product!
Stanley Clark (verified owner) –
Lightning fast delivery. Wanted to extend the flush fit look of the Kaw Valley Comp on my mid length scorpion. This is exactly what I was looking for and it did not disappoint. It’s the perfect length. Scorpion was a tack driver before so stand by for the range report. Bravo Zulu for now.