15x1mm RH to 5/8″-24 TPI Conversion Adapter
FACTORY DIRECT TO YOU PRICE $21.95
$21.95
15x1mm RH to 5/8″-24 TPI Conversion Adapter
FACTORY DIRECT TO YOU PRICE $21.95
Suggested Retail Price $21.95
M15 x 1 RH to 5/8″-24 TPI Conversion Adapter (M15 x 1 thread is used on many European manufactures)
This adapter fits all 15mm x 1 RIGHT HAND threaded barrels, when installed allows the use of all 5/8″-24 threaded barrel devices or accessories. To install it, all you have to do is un-screw your barrel cap, break or other device/accessory and then replace it with this adapter which will give you a 5/8″-24 male thread on the end of the barrel. You are now ready to attach any device/accessory that fits the 5/8″-24 threaded barrel that is commonly used on the larger 30 cal. guns. Adapter is High Quality 4140 Steel with Black Oxide Finish.
BORE = .465″
( Rated for bullets up to .45 Cal )
ALWAYS VERIFY YOUR MUZZLE DEVICE IS RATED FOR THE CALIBER YOU INTEND TO SHOOT
ALWAYS VERIFY PROPER ALIGNMENT BEFORE FIRING
Packaged by the manufacturer (Hughes Precision) in non-retail packaging, such as an unprinted box or plastic bag
Manufactured From High Quality 4140 Steel With Black Oxide (blued) Finish.
All of our products are manufactured IN HOUSE.
We only make parts for the shooting sports.
Made In Michigan U.S.A.
Weight | 1.6 oz |
---|---|
Dimensions | 2 × 2 × 1 in |
Metric Thread | M15x1 RH |
Firearm Specific | HK 5.56 |
Only logged in customers who have purchased this product may leave a review.
Free Shipping Over $50.00 Dismiss
Rustin G. (verified owner) –
PERFECT!!! Exactly what i needed to put my suppressor on an old Spanish FR8 rifle! Removed the old flash hider, tightened this adapter down, and now i can use my 30 cal suppressor, or a muzzle brake to tame down the recoil from the steel buttplate! Will fit any hk 91/cetme style barrel and make it easy to use aftermarket 5/8×24 brakes!
Zack (verified owner) –
Great quality. Best price anywhere. And its not an oversized chunk of pot metal like the cheap ebay adapters. I would definitely reccomend these adapters.
pedson66 (verified owner) –
Great quality and great value. Using these on H&K91 and a CETME to mount the popular muzzle brakes….now if Hughes would only manufacture a M15x1 to 1/2-28 I can use it for the HK93 and C93
snpr1 (verified owner) –
Just came in for use on my 1990s Century G3. Perfect fit and very well made for an great price and fast shipping. Beat out the competition on quality and was 30 bucks cheaper!
Thanks again!
nickclaferriere (verified owner) –
THANK YOU!! I have a Gen 1.5 PTR 32 that I could not figure out. Once I figured out I needed a 15/1 RH, your product was the perfect solution to let me use the 5/8ths muzzle devices.
Older ptr 91/Gen 1 32s may be using the 15/1 thread—past a certain date, they switched to 5/8, but if a 1/2 won’t even thread, and a 5/8 device just drops to the base of the thread without engaging, try these out. Great quality, fits great!